Professional Choice NBSEROL SPD TOP-LIGHT 800W LED Grow Light - Reliable China Suppliers & Factory Solutions
Specifications
Spectrum |
SPF 4-FLW Indoor(TM) |
Light Output PPF |
2000-2080μmol/s |
Efficacy |
2.5-2.6μmol/J@220VAC |
AC Output Power |
800W@220VAC |
AC Input Voltage |
100-277VAC,50/60Hz |
Light Distribution |
120° |
Mounting Height (Above Canopy) |
24 ”-72 ”(600-1800mm) |
Thermal Management |
Passive |
Max.Ambient Temperature |
90°F/35℃ |
Dimming |
10V-source&DALI control |
Total Harmonic Distortion(THD) (Full Load) |
<10% |
Lifetime |
L80:>50,000hrs |
IP Rating |
IP54 |
Controlled Environment |
Indoor stacked or Non-stacked, Greenhouse, Top light |
Certifications |
ETL&cETL、FCC、 IECE、DLC |
Warranty |
5 years Standard Warranty |
Electric Specifications
Ac Voltage |
120V |
208V |
220V |
277V |
AC Current |
6.67A |
3.87A |
3.66A |
2.92A |
AC power |
799W |
805W |
806W |
809W |
Power Factor |
0.98 |
0.98 |
0.98 |
0.98 |
Spectra
Standard accessories
AC Plug Type |
Mounting Hardware |
Packing |
N5-15 NAME 5-15P N6-15 NAME 6-15P N7-15 NAME 7-15P N8-20 NAME 8-20P |
SWR Steel Wire Rope MLS Manual Lifting Sling |
S Single |
Spectra
PPFD of SPC TOP-LIGHT 2M 800W (Bloom:800W) Footprint:4x6ft or 3x5ft
DALI Control System
Controller
Accessories
Dimension
- When the LED grow lights can switch the spectrum, our controller can realize this spectrum switch.
- Four channels control.
- Power control.(0-100%)
- Scenario mode setting.
- Time-division power on switch control.
- Sunrise and sunset modes.
- Reduce power or turn off lights at high temperature. PPFD settings.(Optional function)
- CO² PPM settings(Optional function)
Dimensions
Part |
Length |
Width |
Height |
Weight |
Lamp outer box |
33.07〞(840mm) |
14.57〞 (370mm) |
7.09〞 (180mm) |
N.W:17.5Kg(38.58lb) G.W:18.5Kg(40.79lb) |
In a grow tent, we used the scientific research-grade optical radiation standard test instrument of Li-Cor company in America to carry out practical tests. The data showed that the distance from the plant to the grow light's luminous surface was inversely proportional to the size of PPFD, i.e. the longer the distance is, the smaller the PPFD will be. If the distance between the plant and the lamp reaches 24 ", the PPFD maintenance rate will be reduced to about 25%, which means that about 75% of the light energy is lost. In other words, the utilization rate of the grow light is only 25%. If the distance is longer, the utilization rate of the lamp will be lower. It should be noted that if there is no reflective film in the surrounding environment of plant factories and greenhouses, PPFD will decline faster and the utilization rate will be lower. Therefore, the best range for the PPFD is between 12 "to 24". Based on the above tests, it is not difficult to see that the distance between the plant and the luminous surface of the lamp is between 12 and 24 inches, which is the best PPFD acquisition range.