0102030405
NBSEROL NBEST-500P-PLUS: Reliable Phase Protection from China Suppliers & Factory for Optimal Performance
Technical Parameters
| Model no. | NBSET-500P-PLUS |
| Nominal dehumidifying （27℃ , 60%RH） | 500PPD |
| Input Voltage | 265~277V/ 60Hz |
| Rated input power | 2.6 Kw |
| Rated input current | 9.5 A |
| Air flow | 2800 m³/h |
| Applying area (2.6m floor height) | 350-500 ㎡ |
| Humidity control range | 40%-95% |
| Working temperature | 5-38°C |
| Net Weight | 140 kgs |
| Gross weight | 160 kgs |
| Overall dimension | 1750x860x493 mm |
It will be not noticed additionally if any change of above parameters, please contact with us.
Structure Of Product
Operating & Safety Guidelines
- Use the machine on a flat firm floor inside the room. Don't put objects in front of the air inlet for better efficiency.
- Don't use the machine in environments with combustible, explosive, corrosive air, or dust. Do keep at least 50cm of space for ventilation around the machine.
- Please use the machine away from heat sources for lower power consumption.
- The working temperature range of the machine is 5°C ~ 38°C. Compressor protection will be activated if used in ambient temperatures higher than 38°C, stopping operation automatically and potentially reducing the machine's lifespan. Below 5°C, absolute environmental humidity is quite low; do not use the machine unless necessary.
- Make sure to leave at least 50 cm of clearance from the wall to the air inlet and at least 50 cm from the wall to the air outlet when the machine is positioned against a wall. Otherwise, it may affect dehumidifying performance or cause machine failure.
- Do not incline the machine beyond 45 degrees during transport or installation. Correctly assemble the drain pipe for continuous drainage.
- In low-temperature conditions, defrosted water may freeze gradually at the outlet. Please do not turn off the machine until all ice has melted to avoid water overflowing into the room from the water collector.
- Clean the filter net regularly during use. Implement necessary isolation measures when operating in dusty environments to avoid malfunction and extend the working lifespan.
- Do not cut off the power or pull out the plug while the machine is running. Do not damage the power line or make modifications to it.
- Do not insert fingers or objects into the air outlet.
- Do not make any modifications to the machine unless guided by our authorized technicians.
Frequently Asked Questions
Q:What is the nominal dehumidifying capacity of the NBSET-500P-PLUS?
The nominal dehumidifying capacity is 500PPD, measured under environmental conditions of 27°C and 60% Relative Humidity (RH).
Q:What is the recommended operating temperature range?
The machine operates efficiently within a temperature range of 5°C to 38°C. Using the machine in temperatures above 38°C will automatically trigger the compressor protection system and shut down operation.
Q:How much clearance space is required around the dehumidifier?
You must maintain at least 50 cm of open space around the machine for proper ventilation. When positioned against a wall, ensure a minimum of 50 cm clearance from both the air inlet and air outlet.
Q:Can the unit be used in dusty or harsh environments?
Avoid operating the machine in areas with combustible, explosive, corrosive, or heavily dusty air. If used in dusty conditions, regular filter cleaning and necessary isolation measures must be taken to prevent system malfunction.
Q:What precautions should be taken when moving or installing the machine?
Do not tilt the machine beyond 45 degrees during relocation or installation. Ensure the unit is placed on a flat, firm indoor floor, and properly assemble the drainage pipeline.