NBSEROL NBEST-500P-PLUS Phase Protector Machine from China Suppliers and Factory - Safe Operation Guaranteed
Technical Parameters
| Model no. | NBSET-500P-PLUS |
| Nominal dehumidifying (27℃ , 60%RH) | 500PPD |
| Input Voltage | 265~277V/ 60Hz |
| Rated input power | 2.6 Kw |
| Rated input current | 9.5 A |
| Air flow | 2800 m³/h |
| Applying area (2.6m floor height) | 350-500 ㎡ |
| Humidity control range | 40%-95% |
| Working temperature | 5-38°C |
| Net Weight | 140 kgs |
| Gross weight | 160 kgs |
| Overall dimension | 1750x860x493 mm |
Structure Of Product
Operating & Safety Guidelines
Use the machine on a flat firm floor inside the room. Don't put objects in front of the air inlet for better efficiency.
Don't use the machine in environments with combustible, explosive, corrosive air, or dust. Do keep at least 50cm of space for ventilation around the machine.
Please use the machine away from heat sources to ensure lower power consumption.
The working temperature range is 5°C ~ 38°C. Compressor protection will trigger if used in temperatures higher than 38°C, stopping operation automatically and reducing machine lifespan. Below 5°C, absolute humidity is very low; do not use the machine unless necessary.
Make sure to leave at least 50 cm of clearance from the wall to both the air inlet and air outlet when positioned against a wall. Otherwise, dehumidification efficiency will be affected or cause system failure.
Do not incline the machine beyond 45 degrees during movement or installation. Correctly assemble the drain pipe for proper drainage.
In low-temperature conditions, defrosted water may freeze gradually at the outlet. Do not turn off or open the machine until all ice has melted to avoid water overflowing from the collector into the room.
Clean the filter net regularly. Take necessary isolation measures when operating in dusty environments to avoid malfunction and extend the working lifespan.
Do not cut off the power or pull out the plug while the machine is running. Do not damage or modify the power line.
Do not put fingers or sticks into the air outlet.
Do not make any modifications to the machine unless guided by our authorized technicians.