0102030405
NBSEROL NBEST-500P-PLUS Phase Protector Machine from China Suppliers and Factory for Optimal Performance
Technical Parameters
| Model no. | NBSET-500P-PLUS |
| Nominal dehumidifying （27℃ , 60%RH） | 500PPD |
| Input Voltage | 265~277V/ 60Hz |
| Rated input power | 2.6 Kw |
| Rated input current | 9.5 A |
| Air flow | 2800 m³/h |
| Applying area (2.6m floor height) | 350-500 ㎡ |
| Humidity control range | 40%-95% |
| Working temperature | 5-38°C |
| Net Weight | 140 kgs |
| Gross weight | 160 kgs |
| Overall dimension | 1750x860x493 mm |
It will be not noticed additionally if any change of above parameters, please contact with us.
Structure Of Product
Operation & Safety Guidelines
- Use the machine on flat firm floor inside room. Don't put objects in front of air inlet for better efficiency.
- Don't use the machine in the environment with combustible, explosive, corrosive air or dusty. Do keep at least 50cm space for ventilation around the machine.
- Please use the machine away from heat for less power consumption.
- The working temperature range of machine is 5°C ~ 38°C. The protection of compressor will be acted if use it in the environment temperature higher than 38°C and stop running automatically, it will reduce the working life of the machine. Below 5°C, absolute humidity of the environment is quite low, do not use the machine if not necessary.
- Do make sure to leave at least 50 cm from wall to air inlet and at least 50 cm from wall to air outlet when the machine used against a wall, otherwise it will affect the dehumidifying effect or cause machine failure.
- Do not incline the machine exceed 45 degrees in moving or installation. Do correctly assemble the drain pipe for drainage.
- In the low temperature condition, the defrosted water will be frozen gradually at the outlet, please don’t open the machine until all the ice melted to avoid water overflow to room from water collector.
- Please clean the filter net regularly in using machine, make necessary isolation measure when use in the dusty environment to avoid malfunction and raise the working life.
- Don’t cut off the power or pull out plug when machine running. Don’t damage the power line or make any change.
- Don’t put fingers or sticks into the air outlet.
- Don’t do any change of machine unless guiding by our technicians.
Frequently Asked Questions
What is the coverage area of the NBSET-500P-PLUS dehumidifier?
The NBSET-500P-PLUS dehumidifier is designed to efficiently cover an applying area of 350 to 500 square meters, assuming a standard floor height of 2.6 meters.
What is the optimal working temperature range for this machine?
The working temperature range of the machine is between 5°C and 38°C. If operated in temperatures higher than 38°C, the compressor protection will automatically activate and stop the machine to prevent damage.
How much ventilation clearance does the dehumidifier require?
You must keep at least 50 cm of space for ventilation around the machine. When placed against a wall, ensure there is at least 50 cm of clearance from the wall to both the air inlet and the air outlet to avoid machine failure.
Can the machine be tilted during transportation or installation?
No, do not incline the machine more than 45 degrees when moving or installing it. Ensure it sits on a flat, firm floor and that the drain pipe is correctly assembled.
What maintenance is required for the filter net?
The filter net should be cleaned regularly. If the unit is used in a dusty environment, make sure to implement necessary isolation measures to prevent malfunctions and extend the working life of the machine.