0102030405
NBSEROL NBEST-500P Ceiling-Mounted Dehumidifier Installation Guide by Trusted China Suppliers and Factory
Technical Parameters
| Model No. | NBEST-500P |
| Nominal dehumidifying (27℃ , 60%RH) | 500PPD |
| Input Voltage | 265~277V/ 60Hz |
| Rated input power | 2.6 Kw |
| Rated input current | 9.5 A |
| Air flow | 2800 m³/h |
| Applying area (2.6m floor height) | 350-500 ㎡ |
| Humidity control range | 40%-95% |
| Working temperature | 5-38°C |
| Net Weight | 130 kgs |
| Gross weight | 150 kgs |
| Overall dimension | 1300x800x715 mm |
It will be not noticed additionally if any change of above parameters, please contact with us.
Structure Of Product
Control Panel
1
“On/Off”
On: press the key into opening mode. Off: press the key into closing mode.
2
“Humidity Hours +”
Press the key “set” first then press the humidity value up with 1%RH scale in running mode. Press the key “set” first then press hours up with 1 hour scale in timed on/off setting mode. During operation, each press will increase the required humidity level by 1%. In timer mode, each press will increase the on / off time of the device by 1 hour.
3
“Humidity Hours-”
Press the key “set” first then press the humidity value down with 1%RH scale in running mode. Press the key “set” first then press the hours down with 1 hour scale in timed on/off setting mode. During operation, each press will decrease the required humidity level by 1%.
4
“Room RH”
Current ambient humidity display when in standby mode and running mode. Blinking when at humidity setting mode.
5
“Set RH”
Display when in the humidity setting mode.
6
“Coil ℉”
Display the temperature of coil.
7
“Room ℉”
Display the temperature of ambient.
8
“Dehumidifying”
Blinking when compressor is working.
9
“Water drop icon”
Blinking when the fan is working.
10
“Defrost”
Blinking when the machine frosting.
11
“Tankfull”
Blinking when tank is full or pull out the tank.
12
“Timed On / Timed Off”
Blinking when in the timed on/off setting mode.
Frequently Asked Questions
What is the nominal dehumidifying capacity of the NBEST-500P?
The nominal dehumidifying capacity of the NBEST-500P is 500PPD under test conditions of 27℃ and 60%RH.
What electrical specifications are required for this dehumidifier?
The unit operates on an input voltage of 265~277V/ 60Hz, with a rated input power of 2.6 Kw and a rated input current of 9.5 A.
What is the recommended applying area and air flow rate?
The NBEST-500P is designed for an applying area of 350-500 ㎡ (assuming a 2.6m floor height) and provides an air flow rate of 2800 m³/h.
How do I adjust the target humidity levels?
Press the “set” key first, then use the “Humidity Hours +” or “Humidity Hours-” keys to adjust the humidity value up or down in 1%RH increments. The humidity control range is 40%-95%.
What does it mean when the "Defrost" indicator blinks?
A blinking "Defrost" light indicates that the machine is currently frosting and initiating its automated defrost cycle. The unit's working temperature range is 5-38°C.
What does a blinking "Tankfull" light indicate?
The "Tankfull" indicator will blink when the water tank is completely full or if the tank has been pulled out of the unit.