0102030405
NBSEROL NBEST-500P Ceiling-Mounted Dehumidifier from China Suppliers and Factory - Installation Guide
Technical Parameters
| Model No. | NBEST-500P |
| Nominal dehumidifying (27℃, 60%RH) | 500PPD |
| Input Voltage | 265~277V/ 60Hz |
| Rated input power | 2.6 Kw |
| Rated input current | 9.5 A |
| Air flow | 2800 m³/h |
| Applying area (2.6m floor height) | 350-500 ㎡ |
| Humidity control range | 40%-95% |
| Working temperature | 5-38°C |
| Net Weight | 130 kgs |
| Gross weight | 150 kgs |
| Overall dimension | 1300x800x715 mm |
It will be not noticed additionally if any change of above parameters, please contact with us.
Structure Of Product
Control Panel
1
“On/Off”
On: press the key into opening mode. Off: press the key into closing mode.
2
“Humidity Hours +”
Press the key “set” first then press the humidity value up with 1%RH scale in running mode. Press the key “set” first then press hours up with 1 hour scale in timed on/off setting mode. During operation, each press will increase the required humidity level by 1%. In timer mode, each press will increase the on / off time of the device by 1 hour.
3
“Humidity Hours-”
Press the key “set” first then press the humidity value down with 1%RH scale in running mode. Press the key “set” first then press the hours down with 1 hour scale in timed on/off setting mode. During operation, each press will decrease the required humidity level by 1%.
4
“Room RH”
Current ambient humidity display when in standby mode and running mode. Blinking when at humidity setting mode.
5
“Set RH”
Display when in the humidity setting mode.
6
“Coil ℉”
Display the temperature of coil.
7
“Room ℉”
Display the temperature of ambient.
8
“Dehumidifying”
Blinking when compressor is working.
9
“Water drop icon”
Blinking when the fan is working.
10
“Defrost”
Blinking when the machine frosting.
11
“Tankfull”
Blinking when tank is full or pull out the tank.
12
“Timed On / Timed Off”
Blinking when in the timed on/off setting mode.
Frequently Asked Questions (FAQ)
What is the nominal dehumidifying capacity of the NBEST-500P?
The NBEST-500P has a nominal dehumidifying capacity of 500PPD under standard testing conditions of 27℃ and 60% Relative Humidity (RH).
What is the recommended application area for this unit?
This industrial dehumidifier is suitable for spaces ranging from 350 to 500 square meters, assuming a standard ceiling height of 2.6 meters.
What are the electrical requirements for the NBEST-500P?
The unit requires an input voltage of 265~277V at 60Hz. It has a rated input power of 2.6 Kw and a rated input current of 9.5 A.
How do I adjust the target humidity level on the control panel?
To set your target humidity, press the "Set" key first, then use the "Humidity Hours +" or "Humidity Hours -" keys to increase or decrease the value by 1%RH increments. The setting range is between 40% and 95%.
What does the blinking "Defrost" light indicate?
The blinking "Defrost" light indicates that the machine is automatically defrosting the internal coils. This function ensures optimal operation when working in lower temperatures down to 5°C.
Why is the "Tankfull" indicator blinking?
The "Tankfull" light will blink if the water drainage tank is full and needs to be emptied, or if the tank has been pulled out and is not securely positioned back in the unit.