0102030405
NBSEROL NBEST-230P Machine - Reliable China Suppliers & Factory for Efficient Operation and Maintenance
Technical Parameters
| Model no. | NBEST-230P |
| Ominal Dehumidifying (27℃, 60%RH) | 230PPD |
| Input Voltage | 208~230V/60Hz |
| Rated input power | 1.6 Kw |
| Rated input current | 7.5 A |
| Air flow | 1500 m³/h |
| Applying area (2.6m floor height) | 90-120m² |
| Humidity control range | 40%-95% |
| Working temperature | 5-38℃ |
| Net Weight | 85 kgs |
| Gross weight | 100 kgs |
| Overall dimension | 910x739x464 mm |
Structure Of Product
Maintenance & Care
Do shutdown the machine and cut power before maintenance.
General maintenance
Wipe the body with a soft cloth in daily use. Use a wet hard cloth to wipe a dirty body, or use a soft cloth moistened with a little diluted neutral detergent.
Regular maintenance
Filter Cleaning: Dust accumulation on the filter affects dehumidification and may cause malfunctions. Clean it at least once a month. Use a dust catcher or wash the filter in clean water (<40 ℃), then reinstall it after it is dry.
Attention:
- The filter cannot be put in sunlight directly or roasted to avoid distortion.
- The filter must be placed before powering up the machine.
- During long periods of non-use, cut the power or unplug the power line and store it in a dry and shady place.
- Do not put down the machine to avoid damage and malfunction.
Frequently Asked Questions
What is the dehumidifying capacity of the NBEST-230P?
The NBEST-230P has a nominal dehumidifying capacity of 230PPD under standard conditions of 27℃ and 60%RH.
How often should I clean the dehumidifier filter?
It is recommended to clean the filter at least once a month. Accumulated dust on the filter can reduce the dehumidifying efficiency or cause system malfunctions.
What is the correct way to clean and dry the filter?
You can use a dust catcher to remove loose dust or wash the filter in clean water below 40℃. Do not place the filter in direct sunlight or roast it, as this may cause structural distortion.
Can I operate the dehumidifier without the filter installed?
No, the filter must always be properly placed and installed before powering up the machine to protect the internal components.
How should the unit be stored if it is not used for a long time?
If the machine will not be used for an extended period, cut the power or unplug the power line, and store the unit in a dry, shady place. Always keep the machine upright and do not lay it down to prevent damage.