Leave Your Message
Products Categories
Featured Products

NBSEROL NBEST-230P Machine Datasheet - Reliable China Factory Suppliers Instructions for Safe Use

Before using the machine, please ensure you read all instructions thoroughly. Make certain that the power supply is between 208~230V/60Hz before turning on the device. Do not power the machine on or off by connecting or disconnecting the power supply directly. Avoid damaging the power cord during the installation or removal process. Refrain from inserting fingers or any objects into the machine. Always disconnect the power cord before cleaning or performing maintenance. This machine must not be used in enclosed or sealed spaces, and it is essential to connect the ground lead properly. Please refrain from making any modifications to the machine unless directed by our technicians. As a trusted China supplier and manufacturer, we ensure quality and safety in all our products for your peace of mind.

    Technical Parameters
    Model no. NBEST-230P
    Ominal Dehumidifying (27℃, 60%RH) 230PPD
    Input Voltage 208~230V/60Hz
    Rated input power 1.6 Kw
    Rated input current 7.5 A
    Air flow 1500 m³/h
    Applying area (2.6m floor height) 90-120m²
    Humidity control range 40%-95%
    Working temperature 5-38℃
    Net Weight 85 kgs
    Gross weight 100 kgs
    Overall dimension 910x739x464 mm
    Structure Of Product
    WDK
    Do shutdown the machine and cut power before maintenance.
    General maintenance

    Wipe the body with soft cloth in daily use. Use a wet hard cloth to wipe dirty body, or use a soft cloth moistened with a little diluted neutral detergent.

    Regular maintenance

    Filter Cleaning: it will affect the dehumidifying effect or cause malfunction if accumulate dust on filter, it needs to be cleaned regularly, clean it at least once a month. Use dust catcher to remove dust or put filter into clean water (<40 ℃) to wash, then place filter back after cleaning.

    Attention:
    • The filter cannot be put in sunlight directly or roasted to avoid distortion.
    • The filter must be placed before power up machine.
    • Long time of non-use, cut the power or unplug power line to put it in dry and shady place.
    • Do not put down the machine to avoid damage and malfunction.
    Frequently Asked Questions (FAQ)
    What is the dehumidifying capacity of the NBEST-230P model?

    The nominal dehumidifying capacity of the NBEST-230P is 230PPD under standard testing conditions of 27℃ and 60% relative humidity (RH).

    What electrical specifications are required for this unit?

    The unit requires an input voltage of 208~230V/60Hz, with a rated input power of 1.6 Kw and a rated input current of 7.5 A.

    How often should I clean the dehumidifier filter?

    It is recommended to clean the filter at least once a month. Dust accumulation on the filter can reduce the dehumidifying performance or cause machine malfunctions.

    What is the correct way to wash and dry the filter?

    You can use a dust catcher to remove loose dust or wash the filter in clean water below 40℃. Do not dry the filter in direct sunlight or roast it, as this can cause distortion.

    What should I do if the machine is not used for a long time?

    If you do not plan to use the machine for an extended period, cut the power or unplug the power line, and store the unit in a dry and shady place. Ensure the machine is kept upright and not put down to prevent damage.