Leave Your Message
Products Categories
Featured Products

NBSEROL NBEST-230P Machine Datasheet by China Suppliers and Factory - Important Usage Instructions

Before using the machine, please read all instructions carefully to ensure safe operation. Ensure that the power supply is set between 208~230V/60Hz before turning on the machine. It is important not to power the machine on or off by directly connecting or disconnecting the power supply. When installing or removing the machine, avoid rolling or damaging the power cord. Never insert fingers or any rod-like objects into the machine while it’s in operation. Always disconnect the power cord before cleaning or maintaining the machine. This equipment is not designed for use in narrow or sealed spaces; ensure that the ground lead is properly connected. Any modifications to the machine should only be performed under the guidance of our technicians. As leading China suppliers and manufacturers, we prioritize safety and quality in our factory operations.

    Technical Parameters
    Model no. NBEST-230P
    Nominal Dehumidifying (27℃, 60%RH) 230PPD
    Input Voltage 208~230V/60Hz
    Rated input power 1.6 Kw
    Rated input current 7.5 A
    Air flow 1500 m³/h
    Applying area (2.6m floor height) 90-120m²
    Humidity control range 40%-95%
    Working temperature 5-38℃
    Net Weight 85 kgs
    Gross weight 100 kgs
    Overall dimension 910x739x464 mm
    Structure Of Product
    Do shutdown the machine and cut power before maintenance.
    General maintenance

    Wipe the body with soft cloth in daily use. Use a wet hard cloth to wipe dirty body, or use a soft cloth moistened with a little diluted neutral detergent.

    Regular maintenance

    Filter Cleaning: it will affect the dehumidifying effect or cause malfunction if accumulate dust on filter, it needs to be cleaned regularly, clean it at least once a month. Use dust catcher to remove dust or put filter into clean water (<40 ℃ ) to wash, then place filter back after cleaning.

    Attention:
    • The filter cannot be put in sunlight directly or roasted to avoid distortion.
    • The filter must be placed before power up machine.
    • Long time of non-use, cut the power or unplug power line to put it in dry and shady place.
    • Do not put down the machine to avoid damage and malfunction.
    Frequently Asked Questions (FAQ)
    Q What is the dehumidifying capacity and voltage requirement of the NBEST-230P?
    The nominal dehumidifying capacity of the NBEST-230P is 230PPD (measured at 27℃, 60%RH). It operates on an input voltage of 208~230V/60Hz.
    Q How frequently should I clean the dehumidifier's filter?
    The filter should be cleaned regularly, at least once a month. Dust accumulation on the filter can reduce the dehumidifying efficiency or lead to machine malfunction.
    Q What is the proper method for cleaning the filter?
    You can use a dust catcher to remove loose dust, or wash the filter in clean water below 40℃. Ensure the filter is not placed in direct sunlight or roasted to dry, as this may cause distortion.
    Q Can I operate the machine without installing the filter?
    No, the filter must be properly installed in the machine before powering it up to prevent internal damage.
    Q How should the dehumidifier be stored during long periods of non-use?
    If the machine will not be used for a long time, cut the power or unplug the power line, and store it in a dry, shady place. Always keep the machine upright and do not lay it down to avoid damage.