0102030405
NBSEROL NBEST-230P High-Quality Machine - Trusted China Suppliers and Factory for Your Needs
Technical Parameters
| Model no. | NBEST-230P |
| Nominal Dehumidifying (27℃, 60%RH) | 230PPD |
| Input Voltage | 208~230V/60Hz |
| Rated input power | 1.6 Kw |
| Rated input current | 7.5 A |
| Air flow | 1500 m³/h |
| Applying area (2.6m floor height) | 90-120m² |
| Humidity control range | 40%-95% |
| Working temperature | 5-38℃ |
| Net Weight | 85 kgs |
| Gross weight | 100 kgs |
| Overall dimension | 910x739x464 mm |
Structure Of Product
Do shutdown the machine and cut power before maintenance.
General maintenance
Wipe the body with soft cloth in daily use. Use a wet hard cloth to wipe dirty body, or use a soft cloth moistened with a little diluted neutral detergent.
Regular maintenance
Filter Cleaning: it will affect the dehumidifying effect or cause malfunction if accumulate dust on filter, it needs to be cleaned regularly, clean it at least once a month. Use dust catcher to remove dust or put filter into clean water (<40 ℃ ) to wash, then place filter back after cleaning.
Attention:
- 1. The filter cannot be put in sunlight directly or roasted to avoid distortion.
- 2. The filter must be placed before power up machine.
- 3. Long time of non-use, cut the power or unplug power line to put it in dry and shady place.
- 4. Do not put down the machine to avoid damage and malfunction.
Frequently Asked Questions
What is the dehumidifying capacity of the NBEST-230P?
The nominal dehumidifying capacity of the NBEST-230P is 230PPD under standard operating conditions of 27℃ and 60%RH.
What electrical specifications are required for this dehumidifier?
The machine requires an input voltage of 208~230V/60Hz, with a rated input power of 1.6 Kw and a rated input current of 7.5 A.
How large of an area can the NBEST-230P cover?
It is designed for an applying area of 90-120m² based on a standard floor height of 2.6 meters.
How often should the air filter be cleaned?
The filter should be cleaned at least once a month. Accumulating dust can lower the dehumidifying efficiency or cause malfunctions. You can clean it using a dust catcher or by washing it in clean water below 40℃.
What precautions should be taken when drying the filter?
Never place the filter in direct sunlight or roast it, as this may cause structural distortion. Ensure the filter is completely dry and properly installed before starting the machine.
How should the unit be stored when not in use for a long time?
Disconnect the power supply or unplug the power line, and store the machine upright in a dry, shaded place. Do not lay the unit down to avoid internal damage and malfunction.