Leave Your Message
Products Categories
Featured Products

China Suppliers Factory NBSEROL SPD VEG 300W LED Grow Light for Commercial Cannabis Cultivation

Introducing the SPD FOLDING PROVEG 6P, an advanced cloning and vegetative top-lighting solution designed specifically for commercial cannabis cultivation. This innovative product caters to a wide range of growth scenarios, from cloning to the vegetative stage, Manufactured in China, the SPD FOLDING PROVEG 6P is ideal for environments that require co-supplementation due to elevated PPFD levels, with recommendations ranging from 500-1200 µmol/m²/s during the reproductive stage. This cutting-edge lighting solution is built on the proven performance of its predecessor models—SPA, SPB, SPC, and SPDX PLUS—ensuring reliability and efficiency for cannabis suppliers and cultivators alike. Trust the quality of a product from a leading factory in China to enhance your cultivation capabilities

    SPD FOLDING PROVEG 6P L33 & UV33 300W-4x4FT

    Specifications

    Light source Philips & Seoul & Sanan
    Spectrum SPFA20-FLW Indoor(TM) SPF 1-FLW Indoor(TM)
    Light Output PPF 750-780μmol/s
    Efficacy 2.5-2.6μmol/J@220VAC
    AC Output Power 300W@220VAC
    AC Input Voltage 100-277V AC, 50/60Hz
    Light Distribution 120°
    Mounting Height (Above Canopy) 5”-12” (127-305mm)
    Thermal Management Passive
    Max. Ambient Temperature 90°F / 35°C
    Dimming 10V-source & DALI control
    Total Harmonic Distortion (THD) <10% (Full Load)
    Lifetime L80: >50,000hrs
    IP Rating IP54
    Controlled Environment Indoor stacked or Non-stacked, Greenhouse, Top light
    Certifications ETL & cETL, FCC, IECE, DLC
    Warranty 5 years Standard Warranty

    Electric Specifications

    AC Voltage 120V 208V 220V 277V
    AC Current 2.58A 1.47A 1.38A 1.08A
    AC Power 310W 305W 303W 300W
    Power Factor 0.95 0.95 0.95 0.95

    Spectra

    SPD FOLDING PROVEG 6P L33 & UV33 300W-4x4FT Spectrum Graph
    Family SPF SPIDER PLUS
    Model 6p 6p
    Spectrum SPF A20-LW Indoor(TM)
    SPF 1-FLW Indoor(TM)
    Input Voltage 100-277V
    AC Power Cord 01: 5ft (1.525m); 02: 10ft (3.05m)

    Standard Accessories

    AC Plug Type Mounting Hardware Packing
    N5-15 NEMA 5-15P / N6-15 NEMA 6-15P / N8-20 NEMA 8-20P SWR Steel Wire Rope / MLS Manual Lifting Sling S Single

    PPFD Layout

    PPFD layout SPF A20-FLW 300W

    PPFD of SPD FOLDING PROVEG 6P L33/UV33 300W
    (SPF A20-FLW Light quality: 300W) Footprint: 4ft x 4ft

    PPFD layout SPF 1-FLW UV 300W

    (SPF 1-FLW UV Light quality: 300W) Footprint: 4ft x 4ft

    DALI Control System

    DALI Controller
    DALI Accessories
    DALI Controller Dimensions
    • When the LED grow lights can switch the spectrum, our controller can realize this spectrum switch.
    • Four channels control.
    • Power control (0-100%).
    • Scenario mode setting.
    • Time-division power on switch control.
    • Sunrise and sunset modes.
    • Reduce power or turn off lights at high temperature. PPFD settings (Optional function).
    • CO² PPM settings (Optional function).

    Standard Accessories List

    No. Item Type / Specifications
    1 Power cord 5-15P/6-15P/8-20P (NEMA 5-15P/NEMA 6-15P/NEMA 8-20P)
    2 Instructions Standard User Manual
    3 Wire rope chain or "V" hook Standard Mounting Kit
    4 Remote controller Compatible controller unit

    Dimensions

    Part Length Width Height Weight
    Lamp outer box 46.46〞(1180mm) 12.60〞(320mm) 14.96〞(380mm) N.W: 9.5Kg | G.W: 11.0Kg

    Light On/Off Suggestions

    Seeding 20 hours/4 hours or 18 hours/6 hours
    Vegetative 20 hours/4 hours or 18 hours/6 hours
    Flowering /

    Tips

    1 Recommended indoor working temperature: Daytime: 22-28 degrees / Night: 20-22 degrees
    2 Recommended carbon dioxide concentration: 1200 to 1500 ppm.
    3 Recommended hydraulic VPD: 1.0-1.49 kPa / Night: 0.8-1.2 kPa
    4 Recommended relative humidity: Leaf stage: 75-80% / Pre-Flowering stage: 60-70% / Late Flowering: 50-55%
    SPF SPIDER PLUS 8P L112 1000W-4x4FT

    How to use SPF SPIDER PLUS *P Grow light

    How to use SPF SPIDER PLUS P Grow light instructions

    Frequently Asked Questions (FAQ)

    What light sources and spectrums are used in the SPD FOLDING PROVEG 6P?

    The grow light features high-quality diodes from Philips, Seoul, and Sanan. It is equipped with SPFA20-FLW Indoor(TM) and SPF 1-FLW Indoor(TM) spectrum profiles designed for optimal plant development.

    What are the recommended environmental conditions for optimal growth?

    We recommend a daytime temperature of 22-28°C and a nighttime temperature of 20-22°C. Relative humidity should be kept at 75-80% for the leaf stage, 60-70% for pre-flowering, and 50-55% for late flowering.

    What features does the DALI Control System offer?

    The DALI Control System supports spectrum switching, 4-channel control, 0-100% power dimming, scenario mode settings, time-division power-on controls, sunrise/sunset simulation, and high-temperature auto-dimming.

    What is the coverage area and mounting height for this fixture?

    The fixture is designed for a footprint of 4ft x 4ft. The recommended mounting height above the crop canopy is between 5 to 12 inches (127-305mm).

    What is the lifespan and warranty of the grow light?

    This fixture has a lifetime rating of L80: >50,000 hours and comes with a 5-year Standard Warranty for reliable long-term operations.

    What are the recommended light cycles for the seeding and vegetative stages?

    For both seeding and vegetative stages, we suggest running a light cycle of 20 hours on / 4 hours off, or 18 hours on / 6 hours off.