0102030405
China NBSEROL NBEST-500P-PLUS Machine: Phase Protection, Power Supply Issues, Reliable Suppliers & Factory Quality
Technical Parameters
| Model no. | NBSET-500P-PLUS |
| Nominal dehumidifying （27℃ , 60%RH） | 500PPD |
| Input Voltage | 265~277V/ 60Hz |
| Rated input power | 2.6 Kw |
| Rated input current | 9.5 A |
| Air flow | 2800 m³/h |
| Applying area (2.6m floor height) | 350-500 ㎡ |
| Humidity control range | 40%-95% |
| Working temperature | 5-38°C |
| Net Weight | 140 kgs |
| Gross weight | 160 kgs |
| Overall dimension | 1750x860x493 mm |
It will be not noticed additionally if any change of above parameters, please contact with us.
Structure Of Product
Operation & Safety Guidelines
Use the machine on flat firm floor inside room. Don't put objects in front of air inlet for better efficiency.
Don't use the machine in the environment with combustible, explosive, corrosive air or dusty. Do keep at least 50cm space for ventilation around the machine.
Please use the machine away from heat for less power consumption.
The working temperature range of machine is 5 C ~ 38 C , The protection of compressor will be acted if use it in the environment temperature higher than 38 and stop running automatically, it will reduce the working life of the machine. Below 5 , absolute humidity of the environment is quite low, do not use the machine if not necessary.
Do make sure to leave at least 50 cm from wall to air inlet and at least 50 cm from wall to air outlet when the machine used against a wall, otherwise it will affect the dehumidifying effect or cause machine failure.
Do not incline the machine exceed 45 degrees in moving or installation. Do correctly assemble the drain pipe for drainage.
In the low temperature condition, the defrosted water will be frozen gradually at the outlet, please don’t open the machine until all the ice melted to avoid water overflow to room from water collector.
Please clean the filter net regularly in using machine, make necessary isolation measure when use in the dusty environment to avoid malfunction and raise the working life.
Don’t cut off the power or pull out plug when machine running. Don’t damage the power line or make any change.
Don’t put fingers or sticks into the air outlet.
Don’t do any change of machine unless guiding by our technicians.
Frequently Asked Questions
What is the nominal dehumidifying capacity of the NBSET-500P-PLUS?
The nominal dehumidifying capacity is 500PPD under test conditions of 27℃ and 60%RH.
What is the recommended applying area for this dehumidifier?
This unit is designed to cover an applying area of 350-500 ㎡, assuming a standard floor height of 2.6 meters.
What is the safe operating temperature range for the machine?
The safe working temperature range is between 5°C and 38°C. Operating the machine in temperatures above 38°C will trigger the compressor protection system, causing it to stop running automatically to prevent damage.
How much space should be kept around the unit for proper ventilation?
You should maintain at least 50 cm of clearance space around the machine, specifically between the walls and the air inlet/outlet, to ensure efficient air circulation and prevent performance failure.
Can the machine be tilted during transportation or installation?
No, the machine must not be inclined more than 45 degrees during moving or installation. It should always be placed on a flat, firm floor, and the drain pipe must be properly assembled.
What special care is needed in low temperature environments?
In low temperatures, defrosted water may freeze at the outlet. Do not turn on or open the machine until all the ice has fully melted to avoid water overflowing into the room from the water collector.