0102030405
China NBSEROL NBEST-500P Ceiling-Mounted Dehumidifier - Top Suppliers and Factory for Quality Installation
Technical Parameters
| Model No. | NBEST-500P |
| Nominal dehumidifying (27℃, 60%RH) | 500PPD |
| Input Voltage | 265~277V/ 60Hz |
| Rated input power | 2.6 Kw |
| Rated input current | 9.5 A |
| Air flow | 2800 m³/h |
| Applying area (2.6m floor height) | 350-500 ㎡ |
| Humidity control range | 40%-95% |
| Working temperature | 5-38°C |
| Net Weight | 130 kgs |
| Gross weight | 150 kgs |
| Overall dimension | 1300x800x715 mm |
It will be not noticed additionally if any change of above parameters, please contact with us.
Structure Of Product
Control Panel
1
“On/Off”
On: press the key into opening mode. Off: press the key into closing mode.
2
“Humidity Hours +”
Press the key “set” first then press the humidity value up with 1%RH scale in running mode. Press the key “set” first then press hours up with 1 hour scale in timed on/off setting mode. During operation, each press will increase the required humidity level by 1%. In timer mode, each press will increase the on / off time of the device by 1 hour.
3
“Humidity Hours-”
Press the key “set” first then press the humidity value down with 1%RH scale in running mode. Press the key “set” first then press the hours down with 1 hour scale in timed on/off setting mode. During operation, each press will decrease the required humidity level by 1%.
4
“Room RH”
Current ambient humidity display when in standby mode and running mode. Blinking when at humidity setting mode.
5
“Set RH”
Display when in the humidity setting mode.
6
“Coil ℉”
Display the temperature of coil.
7
“Room ℉”
Display the temperature of ambient.
8
“Dehumidifying”
Blinking when compressor is working.
9
“Water drop icon”
Blinking when the fan is working.
10
“Defrost”
Blinking when the machine frosting.
11
“Tankfull”
Blinking when tank is full or pull out the tank.
12
“Timed On / Timed Off”
Blinking when in the timed on/off setting mode.
Frequently Asked Questions (FAQ)
What is the dehumidification capacity of the NBEST-500P?
The NBEST-500P has a nominal dehumidification capacity of 500 PPD (Pints Per Day) under testing conditions of 27°C and 60% Relative Humidity (RH).
What is the recommended application area for this unit?
This commercial dehumidifier is ideal for large spaces ranging from 350 to 500 square meters, assuming a standard ceiling height of 2.6 meters.
What voltage configuration does this dehumidifier require?
The NBEST-500P requires an input voltage of 265~277V running at a frequency of 60Hz.
How can I set my target humidity level?
First, press the "Set" key on the control panel, then use the "Humidity Hours +" or "Humidity Hours -" buttons to adjust the target relative humidity in 1% RH increments.
What does a blinking "Defrost" light indicate?
A blinking "Defrost" light indicates that the machine is automatically melting frost buildup on the internal coils. This is normal behavior when operating in lower ambient temperatures (5-38°C).