Ceiling-Mounted Dehumidifier NBSEROL NBEST-500P from China Suppliers and Factory - Installation Guide Included
| Model No. | NBEST-500P |
| Nominal dehumidifying (27℃ , 60%RH) | 500PPD |
| Input Voltage | 265~277V/ 60Hz |
| Rated input power | 2.6 Kw |
| Rated input current | 9.5 A |
| Air flow | 2800 m³/h |
| Applying area (2.6m floor height) | 350-500 ㎡ |
| Humidity control range | 40%-95% |
| Working temperature | 5-38°C |
| Net Weight | 130 kgs |
| Gross weight | 150 kgs |
| Overall dimension | 1300x800x715 mm |
On: press the key into opening mode. Off: press the key into closing mode.
Press the key “set” first then press the humidity value up with 1%RH scale in running mode. Press the key “set” first then press hours up with 1 hour scale in timed on/off setting mode. During operation, each press will increase the required humidity level by 1%. In timer mode, each press will increase the on / off time of the device by 1 hour.
Press the key “set” first then press the humidity value down with 1%RH scale in running mode. Press the key “set” first then press the hours down with 1 hour scale in timed on/off setting mode. During operation, each press will decrease the required humidity level by 1%.
Current ambient humidity display when in standby mode and running mode. Blinking when at humidity setting mode.
Display when in the humidity setting mode.
Display the temperature of coil.
Display the temperature of ambient.
Blinking when compressor is working.
Blinking when the fan is working.
Blinking when the machine frosting.
Blinking when tank is full or pull out the tank.
Blinking when in the timed on/off setting mode.
The nominal dehumidifying capacity is 500PPD tested under the condition of 27℃ and 60%RH.
It is designed for an applying area of 350-500 ㎡ based on a floor height of 2.6 meters.
First, press the "set" key. Then, press the "Humidity Hours +" key to increase or the "Humidity Hours -" key to decrease the humidity value in 1%RH increments.
The "Tankfull" indicator blinks when the water tank is completely full or if the tank has been pulled out of the machine.
The unit operates efficiently within a working temperature range of 5°C to 38°C.
Press the "set" key first, then use the "Humidity Hours +" or "Humidity Hours -" keys to adjust the time up or down in 1-hour increments.