Best Choice China NBSEROL SPD 10P 1000W LED Grow Light - Top Suppliers & Factory Solutions for Cannabis Cultivation
Specifications
Light source |
Philips & Seoul & Sanan |
Spectrum |
SPFA20-FLW Indoor(TM) |
Light Output PPF |
2800-2900μmol/s |
Efficacy |
2.8-2.9μmol/J@220VAC |
AC Output Power |
1000W@220VAC |
AC Input Voltage |
100-277V AC,50/60Hz |
Light Distribution |
120° |
Mounting Height (Above Canopy) |
5”-12”(127-305mm) |
Thermal Management |
Passive |
Max.Ambient Temperature |
90°F/35C |
Dimming |
10V-source & DALI control |
Total Harmonic Distortion(THD) (Full Load) |
<10% |
Lifetime |
L80:>50,000hrs |
IP Rating |
IP54 |
Controlled Environment |
Indoor stacked or Non-stacked, Greenhouse, Top light |
Certifications |
ETL & cETL, FCC, IECE, DLC |
Warranty |
5 years Standard Warranty |
Electric Specifications
AC Voltage |
120V |
208V |
220V |
277V |
AC Current |
8.29A |
4.81A |
4.57A |
3.65A |
AC Power |
995W |
1000W |
1005W |
1010W |
Power Factor |
0.98 |
0.98 |
0.98 |
0.98 |
Spectra
Family |
SPD FOLDING PRO3 |
Model |
10p 10p |
Spectrum |
SPF A20- FLW Indoor(TM) |
Input Voltage |
100-277V |
AC Power Cord |
01 5ft(1.525m); 02 10ft(3.05m) |
Standard Accessories
AC Plug Type |
Mounting Hardware |
Packing |
|
N5-15 NEMA 5-15P |
SWR Steel Wire Rope |
S Single |
PPFD Layout
PPFD of SPD FOLDING PRO3 10P A20 1000W
(Bloom: 1000W) Footprint: 4ft x 5ft
DALI Control System
- When the LED grow lights can switch the spectrum, our controller can realize this spectrum switch.
- Four channels control.
- Power control (0-100%).
- Scenario mode setting.
- Time-division power on switch control.
- Sunrise and sunset modes.
- Reduce power or turn off lights at high temperature. PPFD settings (Optional function).
- CO² PPM settings (Optional function).
Light On/Off Suggestions
Seeding |
20 hours/4 hours or 18 hours/6 hours |
Vegetative |
20 hours/4 hours or 18 hours/6 hours |
Flowering |
12 hours / 12 hours |
How to use SPF SPIDER PLUS *P Grow light
PPFD@ 6〞/ PPFD@6〞*100% = 100%
PPFD@12〞/ PPFD@6〞*100% = 88.67%
PPFD@18〞/ PPFD@6〞*100% = 68.12%
PPFD@24〞/ PPFD@6〞*100% = 53.33%
PPFD@ 6〞/ PPFD@6〞*100% = 100%
PPFD@12〞/ PPFD@6〞*100% = 70.59%
PPFD@18〞/ PPFD@6〞*100% = 55.12%
PPFD@24〞/ PPFD@6〞*100% = 44.12%
In a grow tent, we used the scientific research-grade optical radiation standard test instrument of Li-Cor company in America to carry out practical tests. The data showed that the distance from the plant to the grow light's luminous surface was inversely proportional to the size of PPFD, i.e. the longer the distance is, the smaller the PPFD will be. If the distance between the plant and the lamp reaches 24", the PPFD maintenance rate will be reduced to about 50%, which means that about 50% of the light energy is lost. In other words, the utilization rate of the grow light is only 50%. If the distance is longer, the utilization rate of the lamp will be lower. It should be noted that if there is no reflective film in the surrounding environment of plant factories and greenhouses, PPFD will decline faster and the utilization rate will be lower. Therefore, the best range for the PPFD is between 5 to 12. Based on the above tests, it is not difficult to see that the distance between the plant and the luminous surface of the lamp is between 5 and 12 inches, which is the best PPFD acquisition range.