Installation of the ceiling-mounted dehumidifier should be divided into two parts:  installation of the dehumidifier and connecting ducts.

Before installation, you need to choose and determine a good installation location from professional  installation perspective first, (if you have decoration drawings, it is best to negotiate with the designer before the installation).

The machine has loss and dislocation phase protector,when the connected three phases outer power supply is not correct as the machine setting , the protector will be disconnected,   all the indicator on control panel will be regularly display, but the machine will not run. Please correct the power supply phase connection, and restart the machine at this condition. This operation requires professional electric technicians.

A. When the dehumidifier is automatically frost, the compressor stops running, the fan continues to run, the frost lights are on, and the running lights are on.

B. After the compressor delays the protection function, the compressor is automatically delayed after 3 minutes.

C. When the temperature and humidity sensor is abnormal, the compressor and fan are turned off, the running lights are flickering, and other indicator lights are extinguished. At this time, all keys cannot work. After the sensor failure is eliminated, the key should be re -opened to work normally.

Please read all the instructions carefully before using the machine
Do make sure the power supply is 208~230V/60Hz before power up the machine.
Don’t power on/off the machine by connecting/cutting the power supply.
Don’t roll or damage the power cord when install or remove the machine.
Don’t put finger or any other rod like object into the machine.
Do cut off the power cord before cleaning or maintain the machine.
Don’t use in arrow and sealed space, make sure to connect the ground lead.
Don’t do any change of machine unless guiding by our technicians.

1. Cooling capacity: 26KW/36KW/50KW/70KW
2. Input voltage:AC120-277V or AC300-480V
3. Energy Efficiency ratio (EER) : 2.8-3.6
4. Noise level: indoor 30-40 dB; Outdoor 50-60 dB
5. Air circulation (circulation air volume) : 500-5000 cubic meters/hour
6. Brand and after-sales service: Mainly project service
7. Special parameters: Can be customized

SPC  TOP-LIGHT  *M  is  a  full-cycle  top-lighting  solution  for commercial cannabis cultivation, which finds its applications to a wide range of scenarios, from vegetative growth to high light intensities in bloom.

It is recommended that SPC TOP-LIGHT *M be deployed in environments where  the  CO²  supplementation,  due  to  high PPFD levels, is between 1000-1600 ppm in the reproductive stage.

SPC TOP-LIGHT 2M is built on the basis of the SPA/SPB/SPCx

PLUS performance of the previous generation.

SPC UNDER CANOPY *P is a full-cycle top-lighting solution for commercial cannabis cultivation, which finds its applications to a wide range of scenarios, from vegetative growth to high light intensities in bloom.
It is recommended that SPC UNDER CANOPY *P be deployed in environments where the CO² supplementation, due to high PPFD levels, is between 1000-1600 ppm in the reproductive stage.
SPC UNDER CANOPY *P is built on the basis of the SPA/SP- B/SPCx PLUS performance of the previous generation.

FOLDING  PRO  8P  is  a  full-cycle  top-lighting   solution  for commercial cannabis cultivation, which finds its applications to a wide range of scenarios, from vegetative growth to high light intensities in bloom. It is recommended that FOLDING PRO 8P be deployed in environments where the CO² supplementation, due to high PPFD levels, is between  1000-1600 ppm in the reproductive stage. SPD FOLDING PRO 8P is built on the basis of the SPA/SPB/SPC/SPDx PLUS performance of the previous generation.

FOLDING  PRO3  8P is a  full-cycle top-lighting solution for commercial cannabis cultivation, which finds its applications to a wide range of scenarios, from vegetative growth to high light intensities in bloom.
It is recommended that FOLDING PRO3 8P be deployed in environments where  the  CO²  supplementation,  due  to  high PPFD levels, is between 1000-1600 ppm in the reproductive stage.
SPD FOLDING PRO3 8P is built on the basis of the SPA/SP- B/SPC/SPDx PLUS performance of the previous generation.

FOLDING  PRO3  8P is a  full-cycle top-lighting solution for commercial cannabis cultivation, which finds its applications to a wide range of scenarios, from vegetative growth to high light intensities in bloom.
It is recommended that FOLDING PRO3 8P be deployed in environments where  the  CO²  supplementation,  due  to  high PPFD levels, is between 1000-1600 ppm in the reproductive stage.
SPD FOLDING PRO3 8P is built on the basis of the SPA/SP- B/SPC/SPDx PLUS performance of the previous generation.